새 탭에서 열립니다

홈  /  기계  /  PP180F 수평형 파우치 포장기

PP180F 수평형 파우치 포장기

Full-servo four-outlet horizontal pouch packing machine — raw pulp, liquid and viscous sauce fills in small-format pouches at up to 160 packs/min with ±1.5% accuracy.

PP180F 수평형 파우치 포장기

이 기계의 기능

Top of the series for speed — built for liquid and viscous fills.

The PP180F is the fastest machine in the PP series: up to 9,600 packs/hour (160 packs/min) on pre-made pouches 50-90 mm wide, with fills up to 200 ml and ±1.5% filling accuracy. It is specified for raw pulp, liquid and viscous sauce products.

The trade-off: pace over premium parts. This is the value-line configuration — Inovance PLC and AirTAC pneumatics — which is how the machine reaches 160 packs/min in its class. If your spec sheet demands Japanese pneumatics and Siemens controls, the PP200F carries that set at 140 packs/min.

가장 적합한 제품

이것들을 잘 구동하며 — 각각에 필요한 것은 다음과 같습니다

  • Viscous sauces in small pouches → thick sauces and pastes portioned to 200 ml with ±1.5% accuracy
  • Raw pulp products → pulp-based fills run at the top of the speed range on this model
  • High-volume liquid portioning → 9,600 packs/hour for consumer sachets shipped in case quantities
  • Trial and travel sizes → small 50-90 mm formats produced at production-line speeds

이 파우치 스타일들이 어떻게 생겼는지 잘 모르시겠나요? 저희의 파우치 종류 안내 각 가방 스타일의 설명이 붙은 도면을 보여줍니다.

구성 및 옵션

귀사의 실제 제품에 딱 맞는 규모

  • 파우치 형태: 4면 밀봉, 도이팩(스탠드업), 주둥이 달린 봉지, 지퍼백
  • 영화: PE, PP, CPP, OPP, PET, PA(NY) 및 VMPET/VMCPP 호일 라미네이트, 그리고 호일 종이 봉투
  • 전원: 총 6kW, 귀사의 설비에 맞춰 220V / 380V / 450V로 구성됨
  • 구성 요소: AirTAC pneumatics, Inovance PLC, VFD and touchscreen, vacuum oil pump
  • 빌드: 코팅 처리된 탄소강 프레임에 304 스테인리스 스틸 하우징
  • 유틸리티: 0.6 MPa에서 0.6 m³/min의 공기

이 기계가 여러분에게 적합한 제품일까요?

구매하기 전에 꼭 물어봐야 할 네 가지 솔직한 질문

  • Do you need 160 packs/min on small pouches? This is the top speed in the series.
  • Are your fills liquid or viscous, up to 200 ml? This configuration is tuned for exactly that.
  • Are your pouches within 50-90 mm wide and up to 280 mm high? That is the working envelope.
  • Is a 6 kW three-phase supply available at 220V / 380V / 450V?

자주 묻는 질문

구매자들이 실제로 묻는 질문들.

What does 160 packs/min assume?

Rated output is 9,600 packs/hour; actual speed depends on your product and fill weight. Viscous fills typically run below the rated figure — we confirm sustained speed with your samples.

How does it open the pouches?

A vacuum oil pump opens each pouch before filling, so a mis-fed pouch is detected rather than filled.

What control set does it use?

Inovance PLC, VFD and touchscreen with AirTAC pneumatics — the value-line configuration for high-count production.

Can it run stand-up and zipper pouches?

Yes. Doypack, zipper and spout formats are standard alongside flat 4-side-seal pouches.

한눈에 보기

생산 속도
9,600 packs/hour (160 packs/min); actual speed depends on product and fill weight
적용 가능한 재료
Raw pulp, liquid and viscous sauce products
파우치 크기 범위
폭 50~90 mm, 높이 100~280 mm
최대 충전 용량
200 ml (제품 종류에 따라 다름)
충전 정확도
±1.5%
포장 자재
PE, PP, CPP, OPP, PET, PA(NY), VMPET/VMCPP 호일 파우치, 호일 종이 봉투
총 출력
6 kW
전원 공급 장치
220V / 380V / 450V
공기 소비량
0.6 m³/min
기압
0.6 MPa
기계 중량
2,500 kg
치수 (길이×너비×높이)
3650 × 1530 × 1180 mm
프레임 재질
304 스테인리스 스틸 하우징; 코팅 처리된 탄소강 프레임
핵심 구성 요소
AirTAC pneumatics; Inovance (China) PLC, VFD and touchscreen; Zhongde (China) vacuum oil pump
견적 받기

이 기계를 귀사의 생산 라인에 맞게 설정해야 하나요?

제품 크기, 포장 형태 및 목표 속도를 알려주시면, 레이아웃과 견적을 보내드리겠습니다.
견적 받기

관련 기계

jc800z 다중 레인 패치 포장기

JC800Z 패치 포장기

이 기계의 기능: 10개의 서보 모터, 전면의 재잠금식 지퍼, 그리고 회전식 매거진에서 공급되는 젤 패치. 이…

jc400 4면 밀봉 패치 포장기

JC400 4면 밀봉 패치 포장기

이 기계의 기능: 단일 레인, 풀 서보 방식, 그리고 고객의 패치에 맞춰 설계된 피더를 갖추고 있습니다. JC400은 단일 레인…

jc700 다열 소포 포장기

JC700 소포장 기계

이 기계의 기능: 지퍼 플래그십 모델이 필요해지기 전까지 5레인 폭까지 처리 가능합니다. JC700은 …의 와이드급 모델입니다.

jc600 다열 소포 포장기

JC600 소포장 기계

이 기계의 기능: 동일한 4면 밀봉 포장 방식을 레인 수만큼 적용합니다. JC600은 …의 첫 번째 멀티 레인 모델입니다.

해결할 가치가 있는 포장 관련 문제가 있으신가요?

×

Do you have questions about packaging machines? Do not hesitate to contact us.

Your email goes directly to our co-founder’s inbox and our sales team.

~ 이내에 답변해 드리겠습니다. 근무일 1일.

1